CyberPower PDU15SW8RNET Uživatelský manuál stáhnout pdf (Strana 72)

PowerPanel™ Business Edition

z Address: The IP address of the UPS RMCARD, PDU or Agent computer’s network interface.

z PC & Equip: The number of the powered computers and equipment.

z Outlets: The amount of outlets on the UPS/PDU.

z Outlet On: The outlets which are supplying power.

z Outlet Off: The outlets which are not supplying power.

z Power Source: The power source of the UPS, e.g. Utility or Battery.

z Remaining Runtime: The estimated amount of time remaining that the UPS can supply power, given its

current load.

z Capacity: The capacity of the batteries expressed as a percentage of full charge.

z Statistics: Indicates the state of the device as Normal, Severe, Warning or Untouched.

 Severe: Devices with severe-level events such as Overheat or Output is off.

 Warning: Devices with warning-level events such as Utility power failure or Battery need

replacement.

 Untouched: Devices which have lost communication with Center.

z Type: The type of software the selected device is running, e.g. Agent, Client or Equipment.

Status

The Status tab displays details about the UPS/PDU.

z Current: The output current in Amps.

z Outlets: The status of each outlet on the UPS/PDU and the name of the connected computer or

equipment.

z Input: Displays the status of the utility power supplied to the UPS.

z Voltage: The voltage of the utility power supplied to the UPS.

z Frequency: The frequency of the utility power supplied to the UPS in Hertz.

z Output: Displays the status of the output power that is being supplied to connected equipment.

z Load Consumption: The power draw of the connected equipment expressed as a percentage of the

total load capacity. This displays as watts on some UPS models.

z Battery: Displays the status of the battery packs.

z Capacity: The capacity of the batteries, expressed as a percentage of full charge.

z Remaining Runtime: The estimated amount of time that the UPS can supply power to its load.

z System: Displays the operating status of the UPS.

Information

Information tab shows information about the PDU or UPS.

z Model Name: The model name of the UPS/PDU.

z Firmware Version: The firmware version of the UPS/PDU.

z MAC address: The MAC address of the UPS RMCARD, PDU or Agent computer's network interface.

z Serial Number: The serial number of the UPS. Note: This will give the internal serial number on some

models.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 99 100

Žádné komentáře

CyberPower PDU15SW8RNET Uživatelský manuál Strana 72