CyberPower PDU20SW8RNET Uživatelský manuál stáhnout pdf (Strana 124)

122

Before launching the PPBE installer, you must change its access permission on the installer. You must have

executable permission on the PPBE installer; otherwise the message “Permission Denied” will be displayed.

Run the below example command to change its permission of the 32-bit installer on 32-bit Linux platform.

sudo chmod u+x ppbe-XXX-linux-x86.sh (XXX is the version number of PPBE.)

Run the below example command to change its permission of the 64-bit installer on 64-bit Linux platform.

sudo chmod u+x ppbe-XXX-linux-x86_64.sh (XXX is the version number of PPBE.)

After the permission of the PPBE installer is changed, the installation procedure will be allowed to launch.

15. Inability to Shutdown NAS during Power Failure.

When using sshpass tool cannot shut the NAS down during power failure, the version of the sshpass tool may be

1.04.

The sshpass tool whose version is 1.04 will result in inabiltiy to shutdown NAS. You must check whether the

version of the sshpass tool is 1.04. If the version is 1.04, you must change another version..

FAQ

1. If multiple computers are connected to a single UPS, how do I determine which computer to install the

Agent or the Client on to ensure each computer can be shut down gracefully in event of power outage?

The computer that is connected to the UPS with a serial or USB cable should install the Agent, and the remaining

ones should install the Client.

2. After the PowerPanel

Business Edition installation is complete, how do I access the web interface?

On Windows, you can select the Start > All programs >PowerPanel Business Edition >PowerPanel Business

Edition Agent (or PowerPanel Business Edition Client/ PowerPanel Business Edition Center) for local use.

You can also enter the URL, http://hosted_computer_IP_address:3052, in the address filed of the web browser

from a remote computer.

On Linux, you only enter the URL, http://localhost:3052, the address field of the web browser from a remote

computer for a local access. You can also enter the URL, http://hosted_computer_IP_address:3052, in the

address filed of the web browser from a remote computer.

3. Which operation systems are supported by PowerPanel

Business Edition software? And which browser

supports them?

Refer to the Getting Started/Prerequisites for more details.

4. My Client computer connects to a PDU. How do I ensure the IP address assigned on the

Power/Configuration page matches the actual PDU IP address? How do I ensure the outlet configured on

the Power/Configuration page matches with the actual connection?

Click the Identify button at the Outlet block screen. The PDU LCD screen will blink the outlet number on the

connected PDU. The PDU IP address can be verified by pressing the select button on the PDU until the IP

address displays on the LCD.

1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 132 133

Žádné komentáře

CyberPower PDU20SW8RNET Uživatelský manuál Strana 124