CyberPower PDU20SW8RNET Uživatelský manuál stáhnout pdf (Strana 45)

Power/Information page

The Power/Information page shows information about the UPS/PDU/ATS which supplies power to the Client

computer. When the Client establishes with a PDU which is connected to a UPS, Information page displays the

information about the PDU and the UPS individually. Information illustrates as follows:

 Device Type: The type of the UPS/PDU/ATS, e.g. UPS/PDU/ATS.

 Model: The model name of the UPS/PDU/ATS.

 Serial Number: The serial number of the UPS/PDU/ATS.

 Firmware Version: The firmware version of the UPS/PDU/ATS.

 UPS Type: The type of the UPS. e.g. On-Line or Line Interactive.

 PDU Type: The type of the PDU. e.g. Monitored or Switched.

 ATS Type: The type of the ATS. e.g. Monitored or Switched.

 Power Rating: The Volt-Amp rating and power rating (Watts) of the UPS.

 Current Rating: The output current rating (Amps) of the UPS/PDU/ATS.

 Voltage Rating: The output voltage rating (Volts) of the UPS/PDU/ATS.

 Frequency Rating: The output frequency rating (Hz) of the UPS.

 Battery Replacement Date: The date that the batteries were last replaced.

 NCL Outlet: The amount of NCL (Non-Critical Load) outlets in the UPS.

 Extended Battery Pack: The number of extended battery packs connected to the UPS.

 Name: The name of the UPS/PDU/ATS.

 Location: Where the UPS/PDU/ATS is located.

 Contact: Who to contact about the UPS/PDU/ATS.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 132 133

Žádné komentáře

CyberPower PDU20SW8RNET Uživatelský manuál Strana 45